Sdvc42-S Automatic High Frequency Piezo Controller (150mA)

The category:Variable Frequency Digital Controller for Piezo Feeder

Profile information:Capacitive Load; Automatic Constant Feed Speed Control; Automatic Resonant Frequency Search; RS485 Communication; Automatic Switch Sensor Type Recognition; Digital Overheat Protection; Overcurrent Protection; Restorable Short 

Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real-time to ensure constant preset feed speed regardless of the weight change of the workpieces

Automatic Resonant Frequency Search: Search out and output the resonant frequency of the load. Other related parameters are also set automatically.

RS485 Communication: All parameters of the controller can be adjusted via RS485.

Automatic Switch Sensor Type Recognition: The controller can recognize and adapt to PNP and NPN switch sensors.

Digital Overheat Protection: If the controller's internal temperature gets too high, it will stop producing heat to protect itself.

Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.

Restorable Short Circuit Protection: If the controller's output is short-circuited, it will shut down to protect itself and the load. But the fuse inside will not be blown. So, when there is no short circuit at the output side, the controller will work again after powering on.

Counting: Count the number of feed materials. The controller will slow down or stop when counting up to the preset value.

Overvoltage Protection: If the input voltage is too high, the power supply of the controller will shut down automatically to protect itself.